A Quick Guide: How to Find the Right Drilling Rig

Getting a new rig is an expensive investment. Drillers around the globe want to use their old rigs to get the maximum productivity out of them. However, the costs associated with maintenance and productivity depletion due to the wear and tear of the structure can force you into the market to buy a new one.

Workers working at a rig site

Alternatively, you might be considering buying new rigs to meet the growing customer demand or expanding your business to new markets. Whatever the reason, knowing what type of drilling rig to invest is imperative. Here, we have listed important factors to evaluate so that you make an informed decision.

What to Look for in Different Drilling Types

Water Wells

The location is of utmost importance when considering installing water wells. In areas with flatter topography, water can be found in shallower grounds, as close as 120 feet down. In similar regions, it makes sense to go for used water wells.

However, in mountainous and rocky regions, water is far below and can be found as low as 6,000 feet underground. To pull water out of such depths, rigs have to bear a lot of stress, which is why it’s recommended to buy a brand new water well rig. While a new one costs more, it comes with a warranty that’s almost a necessity considering the huge price tag.

 Geothermal

Geothermal rigging is used to dig wells and bores for buildings. Generally, they’re used for commercial buildings which have deadlines, thus making reliability an important factor. In cases of schools and hospitals, as a driller, you can’t afford breakdowns or downtimes because of strict timelines.

In such cases, it’s advised to opt for new rigs and lease the equipment, especially for contractors who win sudden contracts. It gives them the benefits of the latest technology, warranty, and maintenance perks without breaking the bank.

Geotechnical

When dealing with geotechnical drilling, maneuverability is the prime factor. If you plan to use them for highways, truck-mounted rigs are an ideal choice. For stationary usage like gas stations, remote track-mounted systems work just as well. As for digging purposes like sampling, sonic and auger are the most effective options.

Overmolded cable


Using and maintaining rigs require reliable components made of quality materials, and Contact Instruments has plenty of those. Whether you want custom cables, overmolded cable, mud gauge, tong torque gauge, clipper weight indicator, or deflection weight indicator, they have got you covered. For more information, contact them today. 

Comments

Post a Comment

Popular posts from this blog

How to Avoid OSHA Violations at Your Drilling Rig

Image
  The health and safety of workers in the oil and gas mining industry are major concerns. Exposure to hazards, extreme work environments, and accidents while operating heavy machinery means that oil/gas industry employees are at a higher risk of injuries and fatalities. As a result, the Occupational Safety and Health Administration ( OSHA ) has outlined certain precautions that help prevent accidents and keep your employees and worksite safe. Significant focus has been put on inspecting oilfield worksites, so you want to be prepared for any unexpected visits at your facility at all times. Staying prepared means that not only do you get to avoid fines and citations , but you also keep your workers protected. Let’s take a look at the top three violations on OSHA’s list, as well as the steps you can take to prevent them. 1. Inadequate Fall Prevention According to the National Safety Council, falls are among the most common hazards in the workplace, leading to approximately 50,000 severe i
Read more

Most Common Oilfield Instrumentation Issues

Image
Oilfield instrumentation  is a system of measuring, recording, and analyzing parameters such as temperature, pressure, and flow rate. It’s used to monitor the production of petroleum and natural gas wells. Here are five common oilfield instrumentation issues that oilfield operators should know about. Equipment Failure Equipment can either fail mechanically or electrically. The most common failures are due to power surges or lightning strikes. Electrical failure is one of the most common causes of oilfield instrumentation issues. They are caused by improper grounding or insulation issues with wiring in the wellhead. Mechanical failures  are usually due to wear and tear on moving parts caused by high-temperature environments or corrosion from corrosive chemicals in the wellhead. Lack of Communication Between the Wellhead and the Surface Any oilfield or gas field instrumentation is at risk of malfunctioning if the communication between the wellhead and surface is faulty. One issue that ca
Read more

Types of Weight Indicator Systems and Their Uses

Image
Weight indicator systems  are commonly used for weight or load indication during oil or drilling processes. It is a valuable instrument that can help you detect and provide accurate readings on the measuring scale. There are different types of weight indicator systems that you can use for minor processes or heavy-duty drilling operations. Contact Instruments  has the best quality and user-friendly weight indicator system that not only offers accurate reading but an exceptional user experience. What are some common types of weight indicator systems? Let's find out. Anchor Type Weight Indicators Anchor weight type weight indicators  offer a quick and efficient indication of hook load and provide a practical drilling experience. Some of its features include: ·  They can be configured in a custom manner with several other tools like pressure gauges, torque gauge, and pump stroke meter. ·  They offers load tolerance of 30,000 pounds to 200,000 pounds. ·  It also consists of dampers that
Read more