Product Focus: Flow and Pressure Measurement

In 2020, Canadian onshore pipelines sufferedforty-five accidents. These drilling calamities can be curbed by ensuring frequent flow and pressure measurements. Here's how flow and pressure measurements work.

 

Multiple flow meters in a drilling rig

Flow Measurements:

Flow measurements are conducted with a device known as flow meters. These devices are known to measure the flow of drilling fluids. Here are two products that efficiently calculate the flow of any fluid.

1.    Turbine Flow Meter

This type of flow meter uses a rotary machine present inside the drilling pipe to measure the volume of liquid or gas. As the fluid passes through the rotating mechanical motor, it calculates the flow speed using sensors. Turbine flow meters are cost-effective, and since they only deal with measuring the flow of fluids, they are accurate too.

2.    Ultrasonic Flow Meter

An ultrasonic flow meter uses sound waves to calculate the rate of fluid flowing. Since it uses sound waves, it can be mounted both inside or outside the drilling pipe. They are mainly used in crude oil drilling due to their durability and low maintenance.

Pressure Measurements:

Pressure measurements are crucial to any drilling process as it provides timely data to prevent excess pressure from developing that can cause accidents. Here are three products that are used to measure pressure.

Multiple pressure gauges


1.    Mud Pressure Gauge

If you’re drilling in harsh conditions and want accurate pressure readings, the mud pressure gauge is the perfect product for you. It provides reliable readings and can issue swift warnings if pressure exceeds the danger level.

2.    Torque Gauge

Torque gauges are known to provide precise pressure measurements and are used mainly in oil drilling. Torque gauges are available in both mechanical and digital forms. They can calibrate pressure readings in both clockwise and anti-clockwise directions.

3.    Standpipe Pressure Gauge

Simple and durable are the two main characteristics of a standpipe pressure gauge. A standpipe gauge contains a blowout plug that sends prompt signals to provide you with accurate

Get Drilling Instrumentation

Acquire drilling products from Contact Instruments now. They have been working in the drilling rig service industry for over ninety years. They offer a wide variety of drilling equipment, including pressure gauges, custom cables, brass wear rings, trash pump parts, and other equipment.

Reach out to them for more information.

Comments

Post a Comment

Popular posts from this blog

How to Avoid OSHA Violations at Your Drilling Rig

Image
  The health and safety of workers in the oil and gas mining industry are major concerns. Exposure to hazards, extreme work environments, and accidents while operating heavy machinery means that oil/gas industry employees are at a higher risk of injuries and fatalities. As a result, the Occupational Safety and Health Administration ( OSHA ) has outlined certain precautions that help prevent accidents and keep your employees and worksite safe. Significant focus has been put on inspecting oilfield worksites, so you want to be prepared for any unexpected visits at your facility at all times. Staying prepared means that not only do you get to avoid fines and citations , but you also keep your workers protected. Let’s take a look at the top three violations on OSHA’s list, as well as the steps you can take to prevent them. 1. Inadequate Fall Prevention According to the National Safety Council, falls are among the most common hazards in the workplace, leading to approximately 50,000 severe i
Read more

What Is Overmolding And Why Is It Important?

Image
Overmolding is done through a process of injection molding in which two or more different materials are used to combine wires and make them into a singular component. To better understanding overmolding , it’s important to have a thorough understanding of how it works.   1.       The cable assembly is placed inside a mold 2.       Molten plastic material is poured into the cavity of the mold 3.       Once cooled, the plastic material solidifies into the shape of the mold and covers the junction point between the wire and its connector The Many Benefits Of Overmolded Cable So, why do people go through the trouble of combining wires into single components? The biggest advantage of doing so is increasing the longevity and reliability of cables and their components. ·          Better Flexibility With overmolding, the flexibility at the cable exit is strengthened. You might subject the cable to more pulling and strain near its connector, and with the help overmolding, there
Read more

What You Need To Know About Mud Pumps

Image
 If you're like most people, you've probably had a tough time finding the right mud pump with all the options available in the market This article will highlight some important things you should know before buying mud pumps. What Are Mud Pumps? Mud pumps are a machine with a vacuum that is used to pull water from low-lying areas and into the sewage system. The units are usually powered by electricity, but they can also be operated on gas or steam. They work by using air pressure to exert force on water, which then forms a stream in the pump hose. Once this stream is formed, it pushes the water through an intermediate chamber and out of one or two outlets before circulating back into the input chamber for re-injection. At this point, most mud pumps will have another outlet from which they can utilize the output flow downstream for agricultural purposes such as irrigation or crop flows. What Are They Used for? Mud pumps are usually used in municipal wastewater plants
Read more